High Precision ER32 Collets
Product Description:
Type:ER spring collet
Name: ER32 SPRING COLLET
Model:ER32
Material:65Mn
Hardness:HRC44-48
Accuracy:0.003mm,0.005mm,0.008mm,0.015mm
- Product Introduction
High precision ER32 collets
Product Description:
Type:ER spring collet
Name: ER32 SPRING COLLET
Model:ER32
Material:65Mn
Hardness:HRC44-48
Accuracy:0.003mm,0.005mm,0.008mm,0.015mm
Our high accuracy spring collets , made of 65Mn steel, quenched, high elasticity, high tensile strength, good clamping tightness, stable cutting. Widely used, only used for boring, milling, drilling, tapping and other operations; high elasticity, strong clamping force , Good stability, no loosening, no vibration of the knife, after two finishing processes, high-frequency quenching and polishing process; fine workmanship, chamfering of the slot, sandblasting in the slot, heat treatment, and slotting after the whole is completed.
Installation Precautions:
1. Fit the slot of the spring collet into the eccentric circle position of the nut, and push the spring collet in the direction indicated by the arrow until a "click" sound is heard, indicating that the spring collet is in place.
2. Then install the collet on the tool, making sure it is in place.
3. Hit the nut against the handle and lock it with a wrench.
Disassembly method:
After unscrewing the nut from the handle, pull out the tool, push inward from the front of the collet and press down against the bottom of the eccentric circle at the same time, and push the collet diagonally until the collet and the nut disassemble open.
