Maintenance of fixed vise

When using a vise in daily life, do not knock the workpiece on the jaws of the vise, but on the platform that fixes the vise body, otherwise the jaws will be damaged, and the screws, nuts and other sliding surfaces should always be kept clean and lubricated , The jaws of the vise are hardened by heat treatment and have good wear resistance. The fixed clamp body is installed on the turntable and can be rotated around the axis of the turntable. When the turntable turns to the desired direction, pull the clamping handle and tighten the clamping screw. Under the action of the clamping plate, the fixed clamping body can be fastened, and there are three bolt holes on the turntable for fixing with the clamping table.