Precautions for the use of QGG precision tool vise
Nov 16, 2022| Precautions for the use of QGG precision tool vise
▃When installed on the clamp table, the jaws of the fixed clamp body must be outside the edge of the clamp table to ensure that the lower end of the workpiece is not obstructed by the edge of the clamp table when vertically clamping the long workpiece.
▃The height of the installation is generally suitable for the height of the jaws to be just flush with the operator's elbow, that is, the operator puts his elbow on the highest point of the bench vice and makes a fist, and the fist just touches the lower jaw.
▃When clamping the workpiece, it must be properly tightened, and the handle can only be tightened by hand, and no external force from other tools is allowed to avoid damage to the lead screw and nut.
▃When working with force, try to apply force toward the fixed clamp body and in the same direction as the axis of the screw rod, and do not knock on the movable clamp body and smooth surfaces.
▃ The Precision toolmakers vise surfaces such as lead screws and nuts should be cleaned and lubricated frequently to prevent rust and ensure their flexible use.
https://www.sinceretools.net/vise/tool-makers-precision-steel-vice.html