What are the precautions for the use of the precision tool manufacturer's vise?

1.It must be ensured that the clamp body is not loose before use, otherwise the processing quality will be affected.

2.The working surface of the jaws that fix the clamp body should be at the edge of the clamp table, so that the lower end of the work-piece is not obstructed by the edge of the clamp table.

3. Only use the hand-tightening handle to clamp the work-piece, otherwise the lead screw, nut or clamp body will be damaged due to excessive force.

4. Do not strike on the smooth surface of the movable clamp body, otherwise it will reduce the matching performance of the movable clamp body and the fixed clamp body.

5. The screw, nut and other movable surfaces should be kept clean and should be maintained regularly, such as adding lubrication and paying attention to rust prevention.