How to install precision vise

1. The fixtures we often use on milling machines are Shandong pliers, indexing heads, three-jaw custom chucks and platform fixtures. When clamping the milling machine, Shandong clamps are usually used to clamp the workpiece.

2. First, install the Shandong pliers in the center of the milling machine table, find the correct position, and then fix the pliers. According to the height of the workpiece, the shape of the workpiece is correct and the surface quality is good. We can put the workpiece that needs to be machined, usually the workpiece. With the base face down, firmly against the pad, then tighten the pliers.

3. In the milling process, Shandong flat mouth is usually used to clamp the workpiece. Because of its simple structure and reliable clamping performance, it has been widely used. The size of the Shandong jaw is distinguished by the width of its jawbone. The pliers for the X62W milling machine are 160mm.

4. Shandong flat nose pliers are divided into two types: fixed type and rotary type. The rotating pliers can rotate 360 degrees around the base and can be fixed at any position in the horizontal plane, thereby expanding its working range, and it is the main type of pliers at present. The pliers are attached to the milling machine with two T-bolts. There are positioning keys on the base. Cooperate with the T-shaped groove in the middle of the worktable to improve the positioning accuracy of the pliers.