Precautions for the use of precision flat pliers

1. Before starting, it is necessary to move the wheel once or twice by manpower, confirm that it is flexible after the movement, and start the machine. When the crusher is in normal operation, the material is conveyed.

2. Before stopping the operation, first stop the feeding and discharge the material in the machine before cutting off the power of the motor.

3. Pay attention to the temperature of the bearing when it is working, so that the bearing is in a good lubrication state, and pay attention to abnormal sound and vibration. When you notice something unusual, stop checking to see if the object is stuck or undamaged.

4. Keep the crusher feeding evenly and prevent overload. We must strictly prevent metal and wood from falling into the machine. When it cannot be broken, the moisture content of the feed should not be too high. When wet crushing, it is necessary to maintain an appropriate amount of water to prevent clogging caused by insufficient flushing water and reduce production capacity.

5. Check whether the size of the broken product meets the requirements. If there are too many particles exceeding the specified size, the reasons should be found out (such as large screening gap, discharge port width, hammer wear, etc.), and corresponding measures should be taken to eliminate them.

6. When the crusher stops, check whether the fastening bolts are firm and how easy it is to wear parts. For the tooth crusher, we should also take advantage of the parking opportunity to remove the wood between the teeth.

7. Wear parts should be replaced or repaired in time.

8. The safety device of the crusher should be kept in good condition, so the safety device cannot be saved.